Nordic POBA2600, Руководство по эксплуатации, Страница: 10 / 12

10
NORDIC
storage in a toolbox). This could cause damage (such as cracks) to the grinding/sanding wheels and place
the user in serious danger.
8.8 OPERATING MODES
8.8.1 Rough grinding (Fig. 11)
Caution: Use the safety device for sanding/grinding (included in items supplied).
For the best rough grinding results, hold the grindingwheel at an angle of between 30° and 40° to the
workpiece surface and guide back and forth over the workpiece in steady movements.
6.8.2 Cutting (Fig. 12)
Caution: Use the safety device for abrasive cutting
When you use the right-angle grinder for cutting purposes, avoid tilting it in the cutting plane. The cutting
wheel must have a clean cutting edge. A diamond cutting wheel is best used to cut hard stone.
• It is prohibited to use the machine on asbestos materials!
• Never use a cutting wheel for rough grinding.
Note: To increase the power and running time of the cordless equipment, we recommend using only our 4.0Ah
battery or other battery with higher capacity.
9. CLEANING AND MAINTENANCE
9.1 CLEANING
• Keep the ventilation slots of the machine clean to prevent overheating of the engine.
• Regularly clean the machine housing with a soft cloth, preferably after each use.
• If the dirt does not come off use a soft cloth moistened with soapy water.
• Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
9.2 MAINTENANCE
Our machines have been designed to operate over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper machine care and regular cleaning.
10. REPAIR
Only use accessories and spare parts recommended by the manufacturer.
If the device is damaged after a few days, despite our quality control and your maintenance, only an
authorized electrician can repair it.

