Nordic POBA2350, Руководство по эксплуатации

Страница: 8 / 12

8
NORDIC
8.3 SWITCH (FIG. 6)
The switch includes direction selection lever (b) and switch trigger (c).
When the lever is set in middle, the switch trigger is locked. Press down the lever and then trigger to turn
on the machine.
If lever symbol ( ) pointing to front of the machine, the chuck runs in forward direction.
If lever symbol ( ) pointing to back of the machine, the chuck runs in backward direction.
To stop the machine, release the switch trigger.
After using the machine, set the direction selection lever in middle position to lock the switch.
• All 3 LEDs are lit: The battery is fully charged.
• 2 or 1 LED(s) are lit: The battery has an adequate remaining charge.
• 1 LED blinks: The battery is empty, recharge the battery.
• All LEDs blink: The battery pack has undergone exhaustive discharge and is defective. Do not use or charge a
defective battery pack.
8.4 MOTOR
It is vital for the motor to be well ventilated during operation. Be sure, therefore, to keep the ventilation
holes clean at all times.
9. CLEANING AND MAINTENANCE
Always disconnect the plug from the socket before carrying out any cleaning work.
9.1 CLEANING
• Keep all air gaps and engine housing clean as far as possible.
• Wipe the device with a clean cloth or blow it with compressed air.
• We recommend cleaning the device every time it’s done.
• Clean the device regularly with a damp cloth and a small amount of soap. Do not use detergents or solvents that can
damage the plastic parts of the device. Be careful that water does not get inside the device.
9.2 MAINTENANCE
Our machines have been designed to operate over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper machine care and regular cleaning. Please charge
the battery regularly, for example, once every 6 months.