
12
The following procedures should be followed on initial startup and whenever the Hot Tub
is drained for routine maintenance.
FILLING THE HOT TUB WITH WATER
1.)
Clear all the debris from your Hot Tub
2.)
Use a garden hose to fill your Hot Tub with water.
NOTE: Do not use home water heater or softened water.
3.)
As the water level rises, check inside the equipment compartment for water leaks.
It may be necessary to tighten unions and/or fittings that may have loosened
during delivery.
4.)
Make sure the T-handled shut-off valves at the pump and left of the power pack
are completely open.
5.)
Keep the water level at least 2" over the top of the filter at all times. All jets must
be under water. Use the ridge above the hydrotherapy jets as a guideline.
APPLYING POWER
Apply power by turning on your dedicated GFCI circuit breaker. Your Hot Tub has been
specifically designed so that by simply applying power, it will automatically heat to the
preset temperature of 100
F and begin its first filtration cycle after completing its
diagnostics check.
ACTIVATING THE WATER PUMP AND JETS
1.)
Press the jet pad on the top-side control panel to activate the low- and high-speed
pump. Rotate the air control valves counter-clockwise and observe the increased
jet action.
NOTE: Let the high-speed pump run for 10 minutes. This helps purge the
air from the water lines.
2.)
Press the jet pad again to turn the high-speed pump off. The low-speed pump will
continue to run.
3.)
Press the light pad to activate and deactivate the light.
4.)
While the pump is running, check again for water leaks at the unions and/or
fittings in the equipment compartment.
FILTRATION CYCLES
Your Hot Tub has been factory preset to automatically filter for 4 hours, twice a day.
During filtration, the low-speed pump will activate. The first cycle will begin within an
hour after the Hot Tub is energized. The second filter cycle will begin twelve hours after
the start of the first filtration cycle. If, for some reason, you prefer it to filter at a different
time, simply turn the power off and back on at the desired time.
Содержание Nordic Hot Tubs
Страница 1: ...INSTRUCTION MANUAL ...