7
NORDIC
7.3 LED LIGHTING
LED Lighting in each side can turned on when the machine is working.
7.4 CHECKING THE CONTACT TRIP MECHANISM
Remove all staples or nails from the magazine. Press the safety nose/contact pin and pull the trigger. The
safety nose/contact pin should move freely.
Reload the staples or nails to the magazine.
Do not use the tool if safety nose/contact pin cannot move freely.
Place the contact pin on the workpiece and press the machine without pulling the trigger, the machine
should not fire; remove the mahine from the work surface, the contact pin should spring back automatically.
Pull the trigger, the machine should not fire.
7.5 INSERTING STAPLES OR NAILS INTO THE MAGAZINE
NOTE: The number of staples or nails left in the magazine can be read using the viewing window.
Remove the battery pack.
Press the release button and pull out the magazine cover.
Tilt the tool and place nails/staples into the track of the magazine channel.
Make sure that the fasteners are placed correctly:
Staples are placed against the profiled side of the rail, the crown of the staple is in the uppermost part of
the magazine (legs are facing away from the body of the tool).
Nails are placed against the profiled side of the rail, with the points of the nails facing downwards.
Close the magazine cover until it engages with the release button.
Reattach battery pack to tool.
Warning: Do not place fasteners of different length. Do not place staples and nails mixed together.
Nailing or Stapling
LOADING STAPLES
LOADING NAILS
