10
NORDIC
Step 4:
Keep squeezing the trigger all the time and release safety contact pin after firing.
Step 5:
To press it against the next area you want to fire a nail or staple into. When the contact pin is
pressed against the work piece the tool will fire.
Firing next staple or nail, repeat step 4 - 5.
Do not keep the trigger depressed when the tool is not in use, to prevent accidental firing when the
tool is not in use.
8.3 DEPTH ADJUSTMENT WHEEL
Depth adjustment helps protect work surfaces and allows proper setting of nail heads.
Turn the depth adjustment wheel towards the , the nail/staple will be fired into the
surface much deeper.
Turning the wheel towards will reduce the depth the nail or staple is fired into the
surface.
REMOVING A JAMMED NAIL OR STAPLE
NOTE: You must remove any jammed nail/staple before using the tool
any further. Otherwise, it could result in damage to the mechanism.
Remove the battery pack from the tool. Open the magazine, remove
the additional staples or nails in the channel. Then remove any jammed
fasteners.
