Nordic ATV, Руководство пользователя

Страница: 9 / 12

Safety:
Read and understand the plow
instruction manual before use.
Scan the QRC instructional videos
on the first page or watch the
videos on our website before use.
(www.nordicplow.com)
Always instruct other users before
they use the plow.
Operation:
Risk of Injury
• Never allow children to
handle the plow. Never allow
anyone to walk beside or sit
on the plow when in use.
• Never operate the plow over
2 to 3 mph. Keep a slow
steady speed.
• If you hit an obstruction,
immediately stop the vehicle
and reverse direction.
• Keep the strap secured near
steering column to keep it
clear of front axles.
Instruction Clarification:
STEP 8: To remove excess space
that may exist between the belly
plate and the frame, add a nut to
the clamp bracket first as shown
in FIG. A. Use a combination of
brackets and clamps provided as
appropriate for your machine.
STEPS 9-10: Assemble these
nuts and bolts loosely by hand
until you achieve the desired 7inch
(178mm) distance from the ground
to the axle hole. Then fully tighten.
STEP 12: Before attaching the
blade to the bracket, make sure
the top pivot plate (Part#3) is on
top. Do not over tighten the lock
nuts (Part#27) – there should be
some wiggle room to allow for
easy placement of the T-Handle
(Part 21) into the multi-position
holes.
STEPS 14: We show two methods
to attach the strap to the blade:
1. Remove one of the upper
bolts (Part#16) from the top
of the plow and replace it
with a longer bolt (Part #30).
Place strap between washer
and blade as shown.
2. Drill a hole in the top center
of blade and attach a clip
as shown in Fig. B (not
included). Attach the strap
or winch hook if available.
FAQ’s
How long will the plow last?
The lightweight design and round-
ed edge technology significantly
reduces friction and wear of the
blade. The bottom edge will show
signs of pits and scratches but
will not degrade the blade. In
addition, each blade is reversible
for added longevity.
Where is the cutting edge?
The Nordic Plow works extremely
well without a cutting edge. The
Plows angle combined with its
weight and that of the machine
and operator provide significant
force tight to the ground. This
force allows for a clean sweep of
snow, slush, mulch, dirt, etc.
Nordic Plow ATV Instructions
Copyright 9/24/13
The plow may not pick up hard,
packed down snow or ice.
Can I use it on uneven surfaces
or grass?
Yes – our rounded edge blade
can be used on paver bricks,
sidewalks, grass, gravel and most
uneven surfaces without causing
damage to the blade or surface
being plowed.
Will the plow leave marks on the
pavement?
The Nordic Plow will not leave
marks on your driveway, unlike
traditional steel plows that can
leave rust and scratches on the
pavement.
Trouble Shooting & Tips
Blade is not flush to ground:
In the angled position, the blade
will not be flush to the ground if
the top pivot and bottom pivot
plates are reversed.
The blade flips forward when
plowing:
Adjust the boots and axle so that
the axle is 7” (178mm) from the
ground.
T-Handle Hard to Insert:
The top and bottom pivot bolt must
be loosened to allow for some
movement in the metal plates.
The blade is heavy to lift with
strap during operation:
After you have pushed the snow
or material, reverse the machine
to clear the blade of the material
before lifting the blade with the
strap.
Belly Plate Heavy to Install:
Prop the belly plate up with
wood or car jacks under frame of
machine – then line up bolts and
attach.
Nordic Plow ATV Instructions
Copyright 9/24/13
English