Nordic Radio Ping 6, Руководство пользователя

Страница: 10 / 16

0
Alarm
Alarm mode is activated, when the alarm button
is pressed and held down for 3 seconds. If there
is an external alarm button connected, you can
also activate the alarm mode by pressing it.
Alarm mode is activated automatically when
Ping™ 6 is moved outside the defined location
while in anchor mode.
While in alarm mode, Ping™ 6 is running at
full power and is ready to respond into your
commands. The mode is automatically left after
one hour, or if another mode is activated by a
command.
NMEA output
Ping™ 6 can send position information also
as NMEA strings. NMEA, a GPS-based data
transferring standard, is used to transfer data
from Ping™ 6 to PC.
NMEA mode can be activated while in any other
mode: tracking mode, anchor mode or alarm
mode. Connect Ping™ 6 to PC with mini USB
cable. Activate NMEA mode by pressing and
holding down both the anchor and the alarm
button at the same time for 3 seconds. When
the mode is activated NMEA data sending is
started. If you want to leave the NMEA mode,
press and hold down the buttons again.
Messaging
Sending and receiving messages
Position updates, tracking updates, anchor and
other alarms are transmitted as SMS messages
by Ping™ 6. Sending tracking updates and
anchor alarms, functions automatically when
the desired mode is on, and defined conditions
fulfilled. Messages are sent to phone numbers
defined in your destination numbers. See
Config 23-24: Destination numbers for more
information.
You can send an update request to your
Ping™ 6 by using your phone’s special
applications, e.g. Twig Navigation.
When a position update request is received,
Ping™ 6 automatically checks if the sender’s
phone number can be found in White list.
If the phone number is in the White list, or if