manualshive.com logo in svg

NORDIC LEGEND B33Z08, Инструкция по уходу и эксплуатации

Поделиться
Скачать
NORDIC LEGEND B33Z08 Скачать руководство пользователя страница 7

CARE AND USE MANUAL

MODEL B33Z08 & B33Z10

POWER ICE AUGER

TOLL FREE HELP LINE 1-844-688-0690

7

OPERATION

STARTING AND STOPPING ENGINE ABOVE FREEZING TEMPERATURES

• 

Move engine to a well ventilated area, outdoors, to prevent carbon monoxide poisoning.

• 

 Move to an area away from flames or sparks to avoid ignition of vapors if present.

• 

Remove all debris from air cleaner holes and gas cap to ensure proper airflow

Cold Engine Start

Starting engine for first time or after engine has cooled off or after running out of fuel

1. Move choke lever to RUN

 

Note: Choke must be in the RUN position when pushing or using the primer bulb

2. Prime unit until primer tube is filled with gas

 

Note: When using the primer bulb allow the bulb to return completely to its original position between pumps

3. Move Choke lever to CHOKE position

 

Note: Choke position is defined as moving the Choke lever as far to the ON position as possible

4. Push toggle switch to the ON position

5. Grasp starter handle and pull out slowly, until it pulls slightly harder. Without letting starter handle retract, pull rope with a 

    rapid full arm stroke. Let it return to its original position very slowly until the engine fires or runs, engage the throttle. Repeat 

    this step every time the starter rope is pulled

 

Note: If engine fails to start after 5-6 pulls, press the primer bulb 1 time and repeat the process

6. After engine starts running, move Choke lever to HALF-CHOKE position until unit runs smoothly

 

Note: HALF-CHOKE is defined as when the Choke lever is half-way between Choke and Run

7. Move the Choke lever to the RUN position and move throttle to the desired speed

 

Note: Run at full throttle whenever possible and do not let unit idle for extended periods of time

8. To stop engine, push the toggle switch to the OFF position

9. When the weather is extremely cold and the engine is difficult to start, turn on start switch, turn off choke, press the pumping

    installation on carburetor by hand, then pull start rope to start engine. After successfully starting the engine, open choke and   

    start drilling ice when the engine is idling smoothly.

Warm Engine Start

1. Move the Choke lever to the Choke position

 

Note: Choke position is defined by moving the choke lever as far to the ON position as possible

2. Continue to Step 5 of the Cold Engine Starting procedure

Hot Engine Start

1. When weather is very hot, begin with Step 5 of the Cold Engine Starting procedure

2. If engine does not fire (Run), refer to Step 1 of the Warm Engine Starting procedure

NOTE: NEVER ATTEMPT TO START ENGINE IN ANY OF THE FOLLOWING WAYS

• 

DO NOT USE A STARTING FLUID

• 

DO NOT SPRAY FLAMMABLE LIQUIDS OR VAPORS INTO AIR CLEANER, CARBURETOR OR SPARK PLUG CHAMBER

• 

DO NOT REMOVE SPARK PLUG AND PULL ON STARTER ROPE. FLAMMABLE FUEL CAN SPRAY OUT AND IGNITE FROM A 

   SPARK FROM THE SPARK PLUG

Содержание B33Z08





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды