CARE AND USE MANUAL
MODEL B33Z08 & B33Z10
POWER ICE AUGER
TOLL FREE HELP LINE 1-844-688-0690
10
STEPS FOR CLEANING BLOCK STYLE FOAM AIR FILTER
NOTE: SEE PARTS EXPLOSION ON PAGE 16
1. Before removing the air filter cover, move the choke lever to the choke position (See Figure 1)
2. To remove air filter cover, get away the bolt on the cover and squeeze the latch tabs on both sides of the cover (See Figure 2)
3. Once the latch tabs are released, remove air filter cover by rotating the cover away from the engine (See Figure 3)
4. Remove the white plastic cover and the foam filter element (See Figure 4) and replace with anew oiled filter, or clean the
original foam filter with warm water and mild soap by following the previous steps for Cleaning Air Filter. Remember to
thoroughly oil the foam filter with 30 or 40 weight motor oil and squeeze out any excess oil
5. Reinstall the foam filter and white plastic cover, pressing it in place to ensure that the foam is fully seated into its sealed
position (See Figure 5 & 6)
6. Replace the air filter cover so that it fully snaps into place and is secured by the latch tabs. Check that the cover is securely
attached by pulling slightly on the cover. If the cover does not move when pulled, then it is secure
Содержание B33Z08
Страница 20: ......
