Nordic ID EXA51, Руководство пользователя

Страница: 18 / 27

Nordic ID Group | Joensuunkatu 7 | FI-24100 Salo |Finland
358 2 727 7700 | Fax + 358 2 727 7720 | info@nordicid.com
18 / 27
2017-09-22
Nordic ID EXA51 and Nordic ID EXA51e User Guide
Version 1.7
NOTE! XXXXX is a serial number of the Nordic ID EXA51
1.10.3.1. CONFIGURING HID MODE VIA APPLICATION
1. Install Nordic ID RFID Demo application (see section 2.1)
2. Connect your device
3. Turn on HID mode, RFID and/or barcode mode in reader settings
4. Close application and make sure Bluetooth connection is closed
5. Reboot your EXA51 device by pressing the power button for 2...3 seconds.
1.11. OPERATING WITH HID MODES
HID BARCODE ENABLED
Reading Barcode:
• Pressing trigger down

barcode aimer starts

Releasing trigger

scanning start
• When tag found, result is sent to HID immediately
• Pressing trigger down during scan

scanning aborted
HID RFID ENABLED
Reading RFID tags:
• Pressing trigger down

RFID reading starts
• Reader read tags in memory as long trigger is kept down. Short beep when new tags found
• Releasing trigger

Reading stops and tags in memory will be transmitted to HID. Short beep when
single tag sent. If no tags found, double low note beeps.
BOTH: HID BARCODE & HID RFID ENABLED.
Activate Barcode reader:
• Trigger click (short press (<350ms) and released immediately)

Barcode scanning start immediately
without aiming.
•
Trigger press and keeping down at least 350ms

Barcode aimer starts

Trigger released

scanning starts.
Activate RFID reader:
• Pressing trigger “double click” and keeping down

RFID reading start. Searching tags. Beep when
tags found.
• Releasing trigger

Reading stop and tags in memory will be transmitted to HID. Short beep when
single tag sent. If no tags found, double low note beeps.