3
• Do not fill the kettle while it is
seated on the power base. Be sure
to unplug it before it boils dry. Never
operate the kettle dry.
• Do not place on or near a hot gas or
electric burner or in a microwave or
heated oven.
• To avoid possible steam damage,
turn spout away from walls or
cabinets during use; use protective
pad under kettle to prevent damage
to surfaces.
• To avoid burns and risk of personal
injury, use extreme caution when
carrying kettle containing hot water.
• Do not operate in the presence of
explosive and/or flammable fumes.
• Do not use for other than intended
use. This appliance is intended for
household use only, not for
commercial or industrial use. Use for
anything other than intended will
void the warranty.
• When pouring water, use caution to
avoid getting splashes of hot water
on hands or other body parts. Pour
slowly to avoid splashes of hot
water.
• Do not overfill or under fill with
water, keep water level between
minimum and maximum marks.
• Do not open the lid during boiling
process.
SAVE THESE INSTRUCTIONS
Usage
Before first use, fill the kettle to maximum level with water, and
boil the water.
Pour the water out, and repeat two times more, or as needed.
This can be needed to clean any dust left from production
environment.
• Put the power base on a flat surface.
• Open the lid and pour water into the kettle. Do not overfill.
There is a mark for maximum level.
• Close the lid and put the kettle on the power base.
• Insert the power plug to the mains outlet.
• Switch the power switch to 1 (On).
LED will indicate that power is on and that the water is being
boiled.
When the boiling point has been reached the kettle will
automatically turn itself off.
• You can also turn off power manually changing the power
switch to 0.
• Lift the kettle from the power base.
• Pour water as needed. Pour with caution; don't get any warm
water on hands, or other parts of body.
• Put the kettle back to the power base, and for safety reasons,
disconnect the power cord from the mains.
Cleaning
Before cleaning the kettle should be lifted away from the power
base, and it should be left to cool down to normal room
temperature.
Do not soak the kettle or base in water.
Do not use corrosive or polishing detergent.
• Clean the kettle and base with a wet cloth and clean the
inside with water or detergent if required.
• Take out the filter, rinse it under warm water, and use a
brush to remove impurities.
Removing limescale
• Fill the kettle to almost maximum mark with water.
• Add 2 tablespoons of citric acid.
• Boil the water.
• Wait at least 30 minutes.
• Flush the kettle with fresh water several times.
• Repeat if needed.
EN
User Manual