Enter and Exit Program mode
Programming Step
Enter Program Mode
Exit Program Mode
*(Master Code)# Factory default is 123456
*
Keystroke Combination
Set Master Code
Programming Step
Enter Program Mode
Update Master Code
*(Master Code)#
Keystroke Combination
0 (New Master Code)#
(Repeat New Master Code)#
Exit Program Mode
*
Add User Cards
Programming Step
Enter Program Mode
Add Card : Using Auto ID (Allows
the device assign card to next
available user ID number)
OR
2. Add Card : Select Specific ID
(Allow manager to define a
specified Use ID to associate the
card to)
OR
*(Master Code)#
Keystroke Combination
1 (Read Card)#
Repeat Step 2 for additional user cards
1 (User ID )# (Read Card ) #
The user ID is any number from 1- 2000
Add Card :By Card Number
OR
1 (Input 8/10 digits Card number)#
2.Add Card :Block Learn (Allows
manager to add up to 2000 card
to the Reader in a single step .)
Takes 3 minutes to program.
1 (User ID number )#(Card quatity )#( The
first card 'number)#
Cards’ number must be consecutive ;
Card quantity =number of card to be
enrolled.
Exit
*
7
www.nordencommunication.com
