INSTRUCTIONS MANUAL
N.º
MNS00024_03
MNS00024_03
12/45
TEC
4.3.3 Change of the SET POINT 2
1- Press the key for 1 second to display the value of the SET POINT2 ;
2 – Use the
key or to increase or decrease the value;
3 - Press for 5 seconds to confirm the new value.
4.3.4 Change of the Diferential 1
1- Press for 5 seconds, it shows st;
2 – Press the key or till the parameter rd1;
3 – Press the key to display the value of the parameter;
4 – Press the key or to change the value;
5 – Press the key to confirm temporarily the new value and display the parameters code;
6 – To memorise the new value press the key for 5 seconds.
4.3.5 Change of the Diferential 2
1- Press for 5 seconds, it shows st;
2 – Press the key or till the parameter rd2;
3 – Press the key to display the value of the parameter;
4 – Press the key or to change the value;
5 – Press the key to confirm temporarily the new value and display the parameters code;
6 – To memorise the new value press the key for 5 seconds.
4.3.6 Configuration for HACCP control on the Powercompact controllers
St
- set point – Working temperature.
rd
– Temperature differential
AH
– Highest temperature level allowed without alarm
AL
– Lowest temperature level without alarm
Ad
– Delay of temperature alarm
y__
year
M__
month
d__
day
u
_ day of the week
h__
hour
n__
minutes
t__
time of the event
Htd
– period of delay of HACCP alarm
HAn, HFn
– Number of HÁ and HF alarms occurred
