Nordcap 402729447, Инструкция по установке и эксплуатации

Страница: 52 / 65

For details see the Electrical Connection paragraph.
• Do not clean the machine with jets of water.
Cleaning the cabinet and accessories
• Pay attention to the selection and use of cleaning products in order to maintain proper
appliance performance and safeness.
• Before using the appliance, clean all the internal parts and accessories with lukewarm
water and neutral soap, or products that are over 90% biodegradable (in order to reduce
the emission of pollutants into the environment), then rinse and dry thoroughly, where
possible clean with dishwashing machine.
• Do not clean the appliance with detergents containing chlorine, solvent-based cleaning
products (e. g. trichloro-ethylene), abrasive powders or agents, scouring pads or
sponges that could damage the surfaces. Do not use organic solvent substances or
essential oils. These substances could damage the parts of the appliance made from
synthetic material.
• Do not use products (even if diluted) containing chlorine (sodium hypochlorite,
hydrochloric or muriatic acid, etc.) to clean the floor under the appliance.
Preventive Maintenance
• In order to ensure the safety and performance of your equipment, it is recommended
that service is undertaken by Electrolux authorised engineers every 12 months, in
accordance with Electrolux Service Manuals. Please contact your local Electrolux
Service Centre for further details.
Repair and extraordinary maintenance
• Repair and extraordinary Maintenance have to be carried out by specialised authorised
personnel. The manufacturer declines any liability for any failure or damage caused by
the intervention of an un authorized technician by the Manufacturer and the original
manufacturer warranty will be invalidated.
Parts and accessories
• Use only original accessories and/or spare parts. Failure to use original accessories
and/or spare parts will invalidate the original manufacturer warranty and may render the
machine not compliant with the safety standard.
Maintenance intervals
• The inspection and maintenance intervals depend on the actual machine operating
conditions and ambient conditions (presence of dust, damp, etc.), therefore precise time
intervals cannot be given. In any case, careful and periodical machine maintenance is
advisable in order to minimise service interruptions.
• It is advisable to carry out the checks with the frequency given in the following table:
19