nord Stage 3 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 64

nord Stage 3 Скачать руководство пользователя страница 45

9. EffEcts | 45

fILtERs

the filters in the delay

FILTER

section are great tools for shaping the delay sound, especially when

large feedback amounts are used. Each consecutive Delay tap is fed through the filter, resulting in
a progressively more processed sound.

With the

LP

setting, all delay taps are passed through a

Low Pass

filter which reduces high fre-

quency content in the delay feedback signal.

the

HP

setting provides a

High Pass

filter, removing low frequency content. this can be useful for

making long delay tails sound less muddy.

the

BP

setting adds a

Band Pass

filter to the delay signal. this will remove both high and low

frequencies, making for a fairly thin and narrow sound.

ANALOG MODE

there are two different delay modes, the normal (“non-analog”) mode, and the Analog Mode,
which is activated by pressing

ANALOG MODE

(shift + filter). In Analog Mode the pitch of any

sounding repeats is altered if the tempo is changed – much like with a vintage analog delay.
What’s more, the exact character of each feedback filter setting differs slightly from when in
“non-analog” mode. In Analog Mode a slight distortion is also introduced into the delay line with
each tap – especially noticeable with larger feedback amounts.

MAstER cLOcK

the Master clock feature for the Delay section is activated by turning

MST CLK

(shift + tempo

knob). this way the delay will be synced to the tempo set for the Master clock, in the Program
section. see page 26 for instructions on how this tempo is set.

the Delay tempo will now be expressed in

subdivisions

of the Master clock tempo, ranging from

1/2 to 1/32 notes. Apart from straight subdivisions/delay taps there are also swing (s), triplet (t)
and dotted (D) options to choose from.

AMP sIM / EQ

the

AMP SIM / EQ

effects unit combines a three-band

equalizer

with sophisticated

amplifier

and speaker cabinet

simulations

. It also includes resonant 24 dB low-pass and high-pass filters,

which can be used to great effect with any sound engine. When no Amp Model or filter is select-
ed, the Amp sim / EQ section provides a neutral EQ and tube style overdrive.

DRIVE

the

morphable

DRIVE

provides a tube style overdrive effect or, if an Amp model is selected,

controls the amount of overdrive for the particular Amp model selected. If the Drive LED is lit, it
indicates that overdrive is active.

EQ sEctION

this is a 3-band equalizer which features bass, sweep-able midrange and treble controls. the

BASS

frequency is 100 Hz, the

TREBLE

frequency is 4 kHz and the

morphable

MID

frequency can

be set between 200 Hz to 8 kHz, using its

FREQ

knob. the boost/cut range is +/- 15 dB.

LP 24 fILtER

the

LP24

filter is a resonant 24 dB per octave

low-pass

filter which can be applied to any of the

three sound engines; Organ, Piano or synth. Use the

morphable

FREQ

knob to adjust the cutoff

frequency of the filter, and the

RES

knob to set the amount of resonance around the cutoff point.

the

DRY WET

control is used for setting the balance between unfiltered and filtered sound.

HP 24 fILtER

the

HP24

filter is a resonant 24 dB per octave

high-pass

filter which can be applied to any of the

three sound engines; Organ, Piano or synth. the

morphable

FREQ

knob adjusts the cutoff fre-

quency of the filter, and the

RES

knob controls the amount of resonance around the cutoff point.

the

DRY WET

control is used for setting the balance between unfiltered and filtered sound.

«
...
43
44
45
46
47
...
»

Содержание Stage 3

































































Отзывы:

Нет отзывов