nord C2D, Руководство пользователя

Страница: 19 / 28

System Menu
Memory Protect – On, Off
This is set to “On” when the Nord C2D leaves the factory, meaning that
you cannot save any changes to the programs . Set this to Off when you
wish to store your own programs . The System or Sound menu settings
and the Live memory are not protected by this setting .
Range: On (default), off
Transpose
Transpose allows you transpose the pitch of the Nord C2D up or down
in semitone steps .
Range: -/+ 6 semitones (default = 0).
Fine Tune
This allows you to fine tune the pitch of the Nord C2D .
Range: +/- 50 cent (default = 0).
Output Routing L/R Mode
If you want to process your sound using external effects or separate
amplifier systems, it can be convenient to route organs to separate
outputs of the Nord C2D . This setting determines which organs should
be routed to the main left & right outputs .
Range: All, Pipe+Electr (Vox & Farf), Pipe+B3, Pipe.
E If the High Level or 11-pin output is not connected, all organs will
be automatically routed to the L&R outputs.
Output Routing ExtRotary Mode
This setting determines which organs should be routed to the 11-pin
and High Level outputs, if these are connected to an external .
Range: B3, Electr, B3+Electr, All.
E If the High Level or 11-pin output is not connected, all organs will
be automatically routed to the L&R outputs.
Keyboard Trig Mode
This allows you to change how the Nord C2D keyboard triggers the or-
gan sounds . When “High” is selected, you will trigger the organ sounds
before the key reaches the end of its travel . This mode closely mimics
the way a vintage tonewheel organ or a pipe organ trigger its notes .
Range: High (default), Low
High trigger point Low trigger point
Sustain Pedal Type
This allows you to change the polarity of a connected sustain pedal, in
case the functionality of your pedal is reversed (when the pedal is up,
sustain is on and vice versa) .
Range: Open, Closed (default).
Sustain Pedal Mode
Controls whether the C2D should respond to sustain pedal messages
or if a connected sustain pedal should just transmit MIDI messages .
Range: Normal, MIDI Only.
M The Pipe organ is never affected by a sustain pedal.
Swell Pedal Type
Different brands of control pedals have different specifications (resistance,
offset and linearity) . To simplify setup and to optimize the response of the
pedal for the Nord C2D, the most common pedal makes are pre-config-
ured, and you simply select the type of pedal you connect .
Range: Roland EV5 (default), Roland EV7, Yamaha FC7, Korg,
Fatar SL
Rotor Control Type
Specifies the type of controller connected to the Rotary Control input .
Range: Closed (default), Open, Halfmoon.
6
The Menus
Any settings that you change in the System or Sound menu will take immediate effect on a global basis, and will be stored until you change them
the next time * . Enter the menus by pressing and holding Shift and the System or Sound button (Prog or Live ) . Select a function with the Up/Down
buttons and change the setting by pressing and holding Shift and the Up or Down button . Exit the menus by pressing a second time on the Prog or
Live 1 button . The MIDI Settings are found at the end of the System menu . The settings in the Pluck/Release menu are accessed with Shift + Pedal
To Great button . These settings are stored in the programs .
M
* The only exception to this is the MIDI Local On/Off setting which always reverts to Local On every time the Nord C2D is powered up.
 Chapter6theMeNUs | 19