nord C2D, Руководство пользователя

Страница: 16 / 28

16 | NordC2dUserMaNUalosv1.X
The Synth Bass Model
The synth bass model is available when the B3, VX or Farf models are
activated . For the tonewheel model you can alternate between the
original tonewheel bass registers or the synth bass model by pressing
Shift + Organ Model .
The main feature of the synth bass model is a monophonic bass
synthesizer with adjustable release time, giving you more time to
move your foot when using a foot pedal board . It also has an adjust-
able pluck for a more pronounced attack . Pluck and release time are
adjusted with the Bass drawbars while holding down the Shift key or
by entering the Pluck/Release menu by holding Shift and pressing the
To Great button .
Splitting the great manual
By pressing the To Great button
you split the great (lower) manual
in two sections at the C3 key .
The lower two octaves of the
great manual are then using the
pedal drawbars .
Hold Shift and press the To Great button to open the Pluck/Release
menu . This option is only available if the Synth Bass model is active .
Pedal Preset
Pressing the Pedal Preset button toggles between the settings in the
Pedal Preset and the panel drawbars .
Hold the Pedal Preset button and adjust the drawbars to edit the Pedal
Preset .
Program area
What is a program?
All sound related knob and button settings can be stored into any of
the two storage areas; Prog and Live . These can be selected with the
corresponding buttons .
With Prog activated, 126 program locations are available . The current
program location number and name is shown in the display . Use the
Up/Down buttons to select a program .
Pluck Level
Release Time
Drawbar level
Note On
Note Off
level
time
001
Jimmys B3
E Changes that you make has to be stored or they will be lost when
you select another program.
Live contains one complete panel setting . Changes are saved auto-
matically, so when you load a stored program or even when you power
off, all settings will be exactly as you left them the next time you return
to that live program .
Loading a Program
When Prog is activated, you can select a program location by pressing
the Up/Down buttons . Programs will be loaded automatically .
When a Live program is activated, you can jump to a program in the
Prog area by pressing the Up/Down buttons .
Storing a Program
To store a program to any of the 126 program locations:
1
Press the Store button once . The display will ask you to enter a
location and the Store LED next to the Store button will start to
flash .
M If the LCD shows “Memory is Protected”, you must turn off the
memory protection setting in the system menu. Please read more
about this on page 8.
2
Select the desired location with the Up/Down Buttons and press
Store again to confirm your intentions to store the current settings
to the selected location .
3
The LCD will briefly indicate “Stored” to confirm that the program
has been stored .
Press any button except the Up/Down, Prog or Live buttons if you wish
to abort the store procedure .
Store As...
By using the Store As feature, you can provide a name to the program
you store .
1
Hold Shift and press the Store button once . The display will show
the current name in the second row with a line under the first
character .
2
Use the Up/Down buttons to move the line/cursor .
3
Hold Shift and use the Up/Down buttons to select a character .
The available characters are a-z, A-Z, 0-9, space and a hyphen (-) .
4
Press Store a second time when you have entered the characters
and use the Up/Down buttons to find a location for the program .
5
Press the Store button a third time to store the program with the
new name on the selected location .
M The Program area is used when you enter the System, Sound
and Pluck/Release menus and change settings. Read more about
these functions on page 21.
Name:
Jazzy Dudes