Installation and Owner’s Manual 5
- The storage of flammable materials behind or around the refrigerator creates a fire hazard. Do not use the area
behind the refrigerator to store anything, especially flammable materials (gasoline, cleaning supplies, etc.)
- A circuit overload can result in an electrical fire if the wires and/or fuses are not the correct size. Use only the wire
and fuse sizes as written in the “Installation Manual”.
- Incorrect installation, adjustment, change to, or maintenance of this refrigerator can cause personal injury, property
damage, or both. Have service and maintenance work done by your dealer or by an authorized Norcold Service
Center.
- Disconnect the DC power source before doing any maintenance work on the refrigerator. All service work on this
refrigerator must be done by a qualified service technician.
- Do not bypass or change the refrigerator’s electrical components or features.
- When you discard an appliance, remove all doors to prevent accidental entrapment and suffocation.
- Do not spray liquids near electrical outlets, connections, or the refrigerator components. Many liquids are electrically
conductive and can cause a shock hazard, electrical shorts, and in some cases fire.
- Do not touch the evaporator or other metal parts inside the refrigerator cabinet with wet hands because they can
freeze to the refrigerator.
- The rear of the refrigerator has sharp edges and corners. To prevent cuts or abrasions when working on the refrig-
erator, be careful and wear cut resistant gloves.
Safety Instructions
About Your Refrigerator
Your refrigerator was thoroughly cleaned before shipment from the factory. It is advisable, however, to clean the interior once more
before using. See “Cleaning”.
Storage Volume:
This refrigerator is made to store fresh and frozen foods and for making ice.
DCL4XXX models
1.5 cubic feet capacity
DCL5XXX models
3.2 cubic feet capacity
CAUTION
!
WARNING
!
