Description of Alphanumeric Codes for 900 Series (Diagnostic Indicators)
The refrigerator’s operating control is equipped with Alphanumeric Codes which assist the service technician in trouble
shooting and alert the refrigerator owner to a problem in any mode of operation. When a problem occurs within a given mode, the
operating controls will revert to a stand-by mode in which an alarm will sound and a two digit alphanumeric code will be displayed in
the center control window. The alarm will sound until an alternate operating mode is selected. The alphanumeric code will continue
to be displayed until the controls are turned off and then back on or until the problem is corrected. Diagnostic codes which begin
with A indicate a minor problem that may usually be corrected by the refrigerator owner. Diagnostic codes beginning with C or D
indicate faults which are not owner serviceable but instead require service from a qualified service technician. Codes and their
meanings begin below.
A1-LP Gas Ignition Failure-Initial Refrigerator Start-Up
Burner ignition failure on initial start-up can occur whenever the refrigerator is started after each shut-down period.
AUTO MODE - 2-Way Models
Alarm, flashing backlight and bell will be
active.
AUTO MODE - 3-Way Models
No alarm, flashing backlight or bell.
Operating controls switch to and operate in the
BATT (DC Heater) mode
MANUAL MODE - 2-Way Model
Alarm, flashing backlight and bell will be
active.
Controls will not switch to another energy
source. Refrigerator will cease operation.
MANUAL MODE - 3-Way Model
Alarm, flashing backlight and bell will be active.
Controls will not switch to another energy
source. Refrigerator will cease operation.
A2-LP Gas Re-Ignition Failure-During Normal gas Operation
A2 code will appear when the gas fails to re-ignite during a cycle period.
AUTO MODE - 2-Way Models
Alarm, flashing backlight and bell will be
active.
AUTO MODE - 3-Way Models
No alarm, flashing backlight or bell.
Operating controls switch to and operate in the
BATT (DC Heater) mode
MANUAL MODE - 2-Way Model
Alarm, flashing backlight and bell will be
active.
Controls will not switch to another energy
source. Refrigerator will cease operation.
MANUAL MODE - 3-Way Model
Alarm, flashing backlight and bell will be active.
Controls will not switch to another energy
source. Refrigerator will cease operation.
A3-Fresh Food Compartment Door Ajar
If the fresh food compartment door is left open for more than two minutes, the refrigerator control turns off the light,sounds
an alarm, and displays the A3 code to the alert the owner that the door is ajar.
AUTO and MANUAL MODE-2 & 3-Way Models
Alarm, flashing backlight and bell will be active. Operation will not be interrupted.
A4-AC Mode Selected, AC Power Not Available
AUTO MODE-2 & 3-Way Models
No code, alarm, flashing backlight or bell. Operating controls will switch to and operate in the next
available energy source.
MANUAL MODE-2 & 3-Way Models
Alarm, flashing backlight and bell active. Controls will not switch to another energy source.
Refrigerator will cease operation.
7
Содержание 9162
Страница 36: ...35...
