2. This field shows the list of the Master KVM or a certain set of Slave KVm currently displayed on the OSD . We
recommend you to give a name to the Slave KVM , or else the display after LIST : will be blank .
3. This field shows the list of connections to the KVM , and the fields are described below :
PWR : It shows the status of power supply and indicates a normal power supply for the equipment (PC or KVM)
connected to the CPU port .
C# : It shows the channel number ; the IC-1504 will display 01-04 ; the IC-1508 will display 01-08 and the IC-15166
will display 01-08; 09-16(Since the screen cannot display all at a time , therefore you can use PgUp/PgDn to
switch the Pages) .
KVM : It shows the KVM model . If there is a number in this field , it shows That a set of KVM connects to this port .
The number 04 indicates Port 4 and 08 indicates Port 8 and 16 indicates Port 16 and So on .
Note : If the connected KVM is not on , there will have on number in this field .
NAME : It shows the name of the equipment , and users can name the Slave KVM or PC on their own . There are
a total of 12 characters Selected from the group of “A~Z”,”a~z”,”0~9”,”+”,”-“,”*”,”/”,”=”,”[“,”]” “,” , “’” , “, “ , “.” ,
“, “ , “:” .
Note : Please use the CapsLock to toggle the upper and lower cases .
SVS : It shows the Smart View Setting ; use
?
+ to open and
?
- to close.The SVS I blank and not clickable if the
KVM is connected In parallel . If this option is set to open , then you can make the switch By operating the
Hot Key Switch or Mouse Clicking or selecting the Option by Auto Scan . You also can use mouse to
click this field .
Selection Bar : It shows the selection bar (Green) ; you can use the
? ?
Keys on the board to move the selection
bar , and the Situated position indicates the selected target for giving Instructions . For
example , if the selection bar points at C#05 and you press Enter , then the system will switch to That
particular PC or press the “ Space BAR” to start editing The name . Press F4 to enable/disable the
SVS option .
4.Instruction Hint Field :
? ?
: Move ; User the
? ?
keys on the keyboard or the mouse to move the selection bar .
SPACE:Edit ; The “Space BAR” on the keyboard is used to start editing the name of the PC or
KVM.
ESC: Exit ; Use the “Esc” key on the keyboard to exit the current option or exit OSD .
F4 : Auto Scan ; Use the F4 key to run Auto Scan , and you can set the residing time , channel display time and
mode of the Auto Scan from System Setting .
F9 : System Setting ; Use the F9 key to enter into the System Setting Menu.
F5 : Clear Name List ; Use the F5 key to clear the values of all Name fields. If you clear the name list under the
Master screen , then you will also Clear the name lists under all slaves . If you clear the name list under a
