Norco BIS-6592LC, Руководство пользователя, Страница: 40 / 83

BIS-6592LC
LED Screen Control Hardware Platform supporting 1080PHD Display
32
Primary/Secondary /Third IDE Master/Slave
These eight options are used to configure IDE device types. Recommend to use the default
setting [Auto] to make system auto detect the device.
Hard Disk Write Protect
HDD Write Protect function setting:
<Enabled> Write Protect is activated, HDD read only:
<Disabled> HDD can write or read.
IDE Detect Time Out
（
Sec
）
Set BIOS searching IDE device in appointed time (by seconds)
ATA
（
PI
）
80Pin Cable Detection
Setup detecting ATA
（
PI
）
80pin cable. There are three options available.
Select <Host & Device>: it will consult the cable type both IDE controller and IDE disk drive,
which is system default; Select<Host> it will use the cable type used by IDE controller
；
Select
<Device> it will use the cable type used by IDE disk drive.