BASE INSTALLATION
(VVRDF4V9)
- 8 -
CAUTION
: When installing the camera outdoors, the following instructions
must be followed closely.
2 Adhere the drilling guide label on the proper location.
3. Drill 4holes into the drilling guide label for the screw anchors.
Insert the screw anchors and attach the housing to the screw anchors
MOUNTING HOUSING TO ELECTRICAL BOX
The housing can also be mounted
on a 4s electrical box.
The housing can also be mounted
on a 2s electrical box.
Plastic
anchors (4x)
Teflon Tape
Torx screws
M6 x 35 (4x)
Wall / Ceiling
4 Poin -
t
D in s ti n
rill g Po i o
Drilling Guide
Label
50201600A
1. Loosen the four Torx screws on the housing cover. Do NOT remove the screws
from the cover.
Torx Screws
UNC 8-32 x 0.75
Dummy plugs(x2)
Torx Screws
UNC 8-32 x 0.75
Torx screws
M3 x 12 (4x)
