BioMonitor SmartLead
P852 Rev B (April 2019)
10
Step 5a
Once the Ultium system is
inserted, the muscle map
will appear to the left, and
the EMG channels and
sensors will appear below.
The Ultium BioMonitor
should automatically
appear, as detected by the
Ultium system (if it does not
– refer to step 2).
To select the BioMonitor
SmartLead for use in a
recording, check the boxes
next to each BioMonitor
channel (Respiration, ECG,
Respiration Rate, Heart
Rate, and R-R Interval).
Step 5b
Continue with the
measurement setup as
described in the Noraxon
system’s hardware manual.
6.6.2 Find My Sensor Feature
Allows the user to quickly locate a specified Ultium sensor while creating/editing a MR3
configuration (refer to section 7 for guidance on how to create or edit a configuration). If one of
the stars (refer to the figure below) is clicked, the corresponding sensor will repeatedly blink light
purple in bursts of 3. If the topmost star is clicked, every sensor that is currently in the
configuration will execute the same blinking pattern.
