22
EN
3. Heat function – low heat
In standby mode, press on the ”low” button
to activate the heat function.
Or
In standby mode, press on the
”low” button on the control
panel or the remote control to
activate the heating function
at low heat (switch on the
lamp on the control panel). By
pressing again on the button,
the heat function is turned off
(the fan will turn off after 30
seconds).
4. Heat function – high heat
In standby mode, press on the ”high” button
to activate the heat function.
Or
In standby mode, press on the
”high” button on the control
panel or the remote control to
activate the heating function
(switch on the lamp on the
control panel). When you
press on the power button
again, this will turn off the
heat function (the fan will
turn off after 30 seconds).
MAINTENANCE
1. Turn off the fireplace.
2. Remove the cord from the plug socket
and allow the fireplace to cool down
completely.
3. The outside of the fireplace can be
wiped with a damp, soft cloth – if
needed, with a small amount of
cleaning agent. Then dry with a dry,
soft cloth.
IMPORTANT:
Ensure that no liquid
enters the fireplace.
4. Alcohol, petrol, abrasives, bone wax
or harsh brushes must not be used to
clean the fireplace, as they can damage
or destroy the fireplace’s surface.
5. The fireplace must not be submerged
in water.
6. After cleaning, the fireplace must be
allowed to dry completely before
switching on again.
7. If the fireplace is not in use for long
periods, we recommend that you
remove the batteries from the remote
control.
1000W
2000W
Low
High
