
11
GB
FAN HEATER
Introduction
To get the most out of your new fan heater, please
read through these instructions before use. Please
also save the instructions in case you need to refer
to them at a later date.
Technical data
Voltage/frequency:
220-240 V ~ 50-60 Hz
Power rating:
1,000/2,000 W
2 heat se cold air
Adjustable thermostat
Overload protection
Indicator
Main components
1. Thermostat dial
2. Indicator
3. Function selector
4. Air inlet
5. Air outlet
6. Feet
Special safety instructions
The fan heater is not suitable for use outdoors, in
bathrooms or in other wet or damp environments.
Please note that the fan heater can become very
hot and should, therefore, be placed at a safe
distance from � ammable objects such as furniture,
curtains and similar.
Keep children and pets away from the fan
heater when it is turned on, as it will get hot.
Do not cover the fan heater. Make sure that
the air inlet and outlet are not blocked. There
should be at least 100 cm free space in front
of the fan heater’s air outlet and at least 50
cm in front of the fan heater’s air inlet.
Do not place the fan heater immediately
under a wall socket.
Do not connect the fan heater using an
on/off timer or other equipment which can
automatically switch the device on.
The fan heater must not be placed in rooms
where � ammable liquids or gases are used
or stored.
If an extension cord is used, it must be
as short as possible and always be fully
extended.
You must not connect other appliances to
the same mains socket as the fan heater.
Always keep the fan heater clean and never
insert objects in the air inlet or outlet, as
this may cause electric shock, or � re, or may
damage the fan heater.
Do not use the fan heater in rooms smaller
than 4 m
2
.
Use
Position the fan heater so that it stands on a
� rm surface and at a safe distance from wet
environments and � ammable objects. If the
fan heater is wall-mounted, it must not touch
� ammable materials and the air inlet must
not be blocked.
3
1
2
6
5
4
5
3
2
1
4
6
6