manualshive.com logo in svg

Nonin LifeSense LS1-9R, Руководство оператора

Поделиться
Скачать
Nonin LifeSense LS1-9R Скачать руководство пользователя страница 18

12

10.

RR

Displays the respiratory rate in breaths per minute. 

The value is the mean of four breaths.

11.

Status Text

Shows alarm messages for the pulse oximeter and battery. 
See “Alarms” section for more information.

12.

Status Text

Shows alarm messages for the capnometer. See “Alarms” 
section for more information.

13.

Alarm Symbol

Space for alarm symbol. No symbol means audible alarms 
are enabled.

A bell with broken lines indicates one or more audible alarms 
are paused. 

A bell with solid lines indicates that audible alarms are 
disabled.

14.

Trend Icon

Touch this icon to display the trend screen. The trend screen 
remains visible until an alarm activates or until the operator 
touches the screen.

NOTE:

 When an alarm is active, this icon does not display on 

the monitor and the trend screen cannot be accessed.

15.

Pulse Oximetry 
Plethysmograph

Displays a graph giving information on the oximetry signal 
(plethysmograph). The signal displays 25 samples per 
second.

16.

Plethysmograph 
Scale Factor

Displays a scale factor for the plethysmogram. Scale factor 
will be either /1, /2, /4, or /8 and is automatically set. 

17.

Respiration Graph

Displays a graph of the CO

2

 in expired air (capnograph).

18.

Battery Indicator

Displays the battery status. See “Checking Battery Capacity” 
for more information.

Table 2: Device and Operating Screen Icons and Display Descriptions (Continued)

No.

Name

Description

Содержание LifeSense LS1-9R





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды