Nonin 3100 WristOx, Руководство оператора

Страница: 27 / 43

27
Connecting the WristOx to a Computer
To use the WristOx with nVISION software (version 5.0 or greater), a WristOx-compatible
computer cable (Model 1000SC-WO) is needed. This cable can be connected to a computer
for data downloading and editing with nVISION software. Use the instructions below to
connect the WristOx to a computer:
1.
Connect the cable to the appropriate COM port on the computer.
2. Plug the cable to the top of the WristOx.
3. Wait until
CP
appears in the WristOx display. The WristOx is now ready for use with
nVISION software.
4. For more information about capturing and saving data, refer to nVISION software’s
online help.
NOTE: When the cable is connected completely and securely, the red triangle on
the cable connector should not be visible.