Nomix Enviro Stem Master, Инструкция по эксплуатации

Страница: 7 / 16

•
Fill the bottle with the required
amount of herbicide (up to
200ml)
•
Take care to avoid spillages
during filling. Follow local
emergency procedures should a
spillage occur
•
With the bottle on a suitable
surface, hold the Stem Master
upside down and insert the air
breather tube into the bottle
•
Firmly hold the Stem Master and
the bottle. Turn the bottle in an
anti-clockwise direction to
tighten.
checking for leaks
Hold the Stem Master in an upright
position and check carefully for any
leaks around the bottle, trigger and
air intake hole.
If a leak is found:
Bottle – tighten the bottle/cap
Air intake hole – remove the bottle,
decant the herbicide and contact
Nomix Enviro
trigger – contact Nomix Enviro
Priming
It is important to prime the Stem
Master before use.
Point the needle into a container
and squeeze the trigger between
two and four times, until fluid
emerges from the needle and all air
is expelled from the unit.
Please Note:
When the Stem
Master is held in the correct
position, the herbicide delivery
aperture is located on the
underside of the needle.
7