Nomics Brizzy+ Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 59

Nomics Brizzy+ Скачать руководство пользователя страница 11

©nomics s.a. All rights reserved

MU_Brizzy

+

_NS26_REV 1_EN /09-2019

9/57

WARNINGS AND SAFETY NOTICES

For your safety and patient safety, please adhere to the following
recommandations

:

•

Please read this user guide and the corresponding patient leaflet carefully. They are part
of the system and must be available at all times. Please pay particular attention to the
sections marked with a triangle bearing an exclamation mark. Also observe the
directions for use of all the accessories used in conjunction with the device.

•

BRIZZY

+

is an internally powered equipment. The device is a class IIa equipment

according to the European Medical Device Directive 93/42/EEC.

•

The device is intended strictly for assisting in the diagnosis of sleep apnea syndrome
and for monitoring its treatment. It is not intended for life support neither for real-time
apnea monitoring.

•

The device is not intended for use on children under three years.

•

Do not operate the device in an environment with explosion hazard like in an oxygen-
rich environment or in presence of other flammable agents.

•

Do not use the device in an MRI environment.

•

The device is not defibrillator proof.

•

Do not immerse the device in water or other liquids, or splash it.

•

Medical electrical equipment needs special precautions regarding electromagnetic
compatibility (EMC). Information relative to EMC are given at chapter “Technical
Specifications”.

•

Portable and mobile RF communications equipment can affect medical electrical
equipment.

•

The equipment should not be used adjacent to or stacked with other equipment and, if
adjacent or stacked use is necessary, the equipment should be observed to verify
normal operation in the configuration in which it will be used.

•

Avoid using the recorder close to another device emitting strong electromagnetic
interferences.

•

It is recommended that you do not use the device on people with pacemakers or similar
medical equipment.

•

Only accessories provided by Nomics may be used. Using accessories or equipment
other than those specified may cause malfunction, increased emissions or reduced
immunity to electromagnetic interference and/or damage and will void the warranty.
Please note that Nomics is not responsible for any loss or damage arising from the use
of accessories or equipment that has not been approved.

•

Only Nonin branded oximetry sensors must be connected to the Nonin branded Xpod
module (NS920).

«
...
9
10
11
12
13
...
»

Содержание Brizzy+




























































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды