Nomadix AG 5000, Руководство пользователя

Страница: 191 / 286

AG 5000
System Administration 187
Defining the Fail Over Options {Fail Over}
Many large scale networks require fail-over support for all devices in the Public
access network. The AG 5000 allows two Nomadix Gateways to act as siblings,
where one device will take up the users should the other device become disconnected
from the network. As part of this functionality, the settings (except IP addresses)
between the two devices will be synchronized automatically.
1.
From the Web Management Interface, click on
System
, then
FailOver .
The Fail Over screen appears:
2.
Enable or disable the
Fail Over
feature, as required.
3.
If you enabled Fail Over, define the
Sibling Status
(Primary or Secondary).
4.
Enter an IP address in the
Sibling IP Address
field.
5.
Define the port in the
Fail Over Port
field.
6.
Click on the check box for
Reboot after changes are saved?
7.
Click on the
Submit
button to save your changes, or click on the
Reset
button to
reset all values to their previous state.
Your product license may not support this feature.
If you are using RADIUS, it is recommended to add both Nomadix
gateways to the RADIUS server.
ag5000_userguide.book Page 187 Friday, March 4, 2005 3:05 PM