NMX920 OEM Integrators Guide
Page 9 of 21
5.5. Board to Board Connection
The NMX920 is available in a direct board to board configuration. In this
configuration, the NMX920 mates directly with system interface and RF connectors
in on the OEM system. This configuration eliminates all modem cabling, resulting
in significant cost savings, and ease of assembly. This option is available at time
of ordering.
The dimensions of the required layout on the host unit are shown below.
Additionally electronic versions of this layout in CADINT format ise available from
Nomadic Communications for import into the system integrator’s CAD system.
Recommend Interface Connectors for Board to Board configuration
RF connector is a PCB surface mounted MMCX male, Part No. Johnson 135-3801-
201 straight plug receptacle or equivalent.
System Interface Connector is a surface mounted 2 x 15 x 2mm plug, Part No.
Samtec TMMH-115-01-S-DV-ES, or equivalent.
