Overload Protection
ed
with 2
types
of
protection:
Lght Show
Of Terme
The
unit
1s
equipp
Steady On — All outlets are on,
power is constant with
no special effects.
Fade On - Lights gradually turn on
illumination increases from minimum to maximum.
Fade Off ~ Lights gradually tum off - ilumination level decreases trom maximum to
Chase ~ Only one outlet at a time illuminates on in numbered sequence.
Cascade -
ifluminate and stay on in numbered sequence. Cascade effect is either
.
Progressive
(no
illumination
to
full),
or
Regressive
(ful
Mumination
to
none).
—
A
15
amp
ercuit
breaker
ack of the unit will activate if TOTAL
exceeds
15 amps — approximately 40
one
hundred
mini
tight
sets.
If
the
entire
unit
is
overloaded, unplug unit, then unplug enough of
the
lights to
get
amperage
back
under
15
amps.
Reset circuit breaker on back of unit by pushing
the button
and plug
the
unit
back in.
OUTLET OVERLOAD - Each unit has a maximum load of 3 amps (about 7 one hundred
Progressive — Starts with all outlets off. Outlets ituminate from #1 to #6, accumulating
mini light sets). When ANY INDIVIDUAL outlet is overloaded, ALL lights will turn off and
4
as they go (ie. #1, then #1-2,
then #1-2.3, ete.).
an
outlet
overload
message
(OL) will
be
displayed.
To
reset,
unplug
unit,
then
un;
lu
Regre:
—
Starts
with
all
.
some of the lights
in
the
outlet
that
appears
to
be
overloaded
and
plug
unit
Ot
eee es of outlets
on
decreases
in
sequence
CAUTION : Digital Decorating is intended ONLY for use with decorative lighting.
DO NOT USE WITH ELECTRICAL APPLIANCES (TVs, refrigerators), POWER
LAWN MOWERS, SNOW BLOWERS or other types of
lighting
Up ~ Outlet #1 up to outlet #6 illuminates in Sequence — no accumulation of outlets, ust one
at a
time.
Down - Qutlet #6 back to outlet #1 in sequence tums off in Sequence — no accumulation of
outlets, just one at a time.
Amperage (AMPS) of Common Decorative Lighting
Below is a chart listing the approximate amperage of common decorative lighting
configurations that can be used with Digital Decorating (Please Note: Amps for mini fight
bulbs are stated using current UL standards of 0.17A per 50 lights). Keep in mind that each
outlet can handle a maximum of 3 amps but the unit has a total capacity of 15 amps.
Since there are 6 outlets and the total unit can only handle 15 amps - each outlet must
be loaded slightly BELOW 3 amps not to overload the unit.
a
Lighting Configuration
AMPS per item
Of sets to3 AMPS
(not to exceed 3 AMPS)
150 Mini
Lights (.17a bulbs)
5
2.55
8
17
27
.
100 Mini
Lights (.17a bulbs)
Light Show Quick Reference Guide
(Ful description of each show on back comer}
50 Mini
Lights
(.17a bulbs)
20 Mini
Lights (.17a bulbs)
25
light C7 set
25 light
C9
set
20
light
G50 set
Cascade
Chasing
20
light
G40
set
Cascade
Chasing
Up
and
Down
18
ft.
Rope
Light
Fast Chasing
<
Morphing Rope Light
12
Cascading Fade OnFade Of
40W Edison Bulb
[oss
6OW Edison Bulb
100W Edison
Bulb
chant indicates you can have up to eight
100 light sets per
It ight
sets
taht fo is outlet
you an addtional four 100 count
sats Or aight 50 coun
ight
set
ee
