Installation
Remove all the blade bracket screws with
split washers from the motor bottom, through
the oval slot on the light kit assembly (fig.21).
Attach one blade assembly to the motor
bottom and secure with the blade bracket
screws and split washers (fig.22).
Repeat the above procedures for the other
three blade
Install one A19 11W(max) Led bulb
into the light
socket (fig .23)
6. Blade Assembly to Motor
7. Installing Bulb
Note:
The dimmer function can not be
used if CFL bulb is used. There is
only ON/OFF function.
Light kit
Blade
sc rew
Caution!
Your fan has an energy-saving wattage limiter. If you replace the bulb with over
70W,
70W.
23
assembly .
