WARNING!
or circuit breaker box before installing, servicing or cleaning.
WARNING!
WARNING!
WARNING!
NOTE:
DO NOT use the ceiling fan if it shows any sign of damage or if it has been dropped.
DO NOT expose the ceiling fan to rain or moisture. Do not operate it outdoors or with wet hands.
DO NOT operate the fan without blades.
DO NOT insert foreign objects between the rotating blades.
Pay special attention to the fan and blades when cleaning, painting or working near the fan.
To prevent injury, make sure the blades are not bent and that there are no objects within the
rotation area.
Do not reverse the rotation until blades have come to a complete stop.
The ceiling fan must be grounded as a precaution against possible electric shock. Electrical
installation should be done or approved by a licensed electrician.
Follow the recommended instructions for the proper method of wiring your ceiling fan. If you do
not know enough about electrical wiring, have the fan installed by a licensed electrician.
The outlet box and joist must be securely mounted and capable of reliably supporting at least
35 lb (15.9 kg).
Use only outlet boxes marked “
Acceptable for Fan Support
” and use the supplied outlet box
screws. Most outlet boxes commonly used to support light fixtures are not acceptable for fan
support and may need to be replaced. Consult a qualified electrician if in doubt.
The fan must not be installed in a ceiling thermally insulated to a value greater than R40.
To reduce the risk of electric shock, this fan must be installed with a wall-isolating control/switch.
All screws must be checked and re-tightened where necessary.
Only use the parts and accessories supplied with this product, or specifically
designated for use with this product by the manufacturer. Substitution with
parts and accessories not designated by the manufacturer could result in
personal injury or property damage.
This ceiling fan is designed for household use only and not for commercial applications.
No responsibility is accepted for damage resulting from improper use or
non-compliance with the instructions.
The important precautions, safeguards, and instructions appearing in this manual are
not meant to cover all possible situations. It must be understood that common sense
and caution are factors that cannot be built into the product.
Not suitable for use with SOLID-STATE speed controls.
SAVE THESE INSTRUCTIONS
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
Important Safety Instructions
The fan must be mounted with the blades at least 6’ 11” (2.1 m) above the floor to prevent
accidental contact with the blades.
All installation should be conducted in accordance with the national and local wiring codes,
including fire-rated construction. Use the national codes if local codes do not exist.
circuit breaker box before installing, servicing, or cleaning.
