8
model no. 043-5116-4 | contact us: 1-866-827-4985
Cleaning and Maintenance
Sa
fety Features
The power indicator light, located near the control panel, lights whenever the heater is
plugged in. The heater is equipped with an automatic overheat protection device located
inside the body of the heater. If the heater grill is obstructed, or if the heater gets too
hot for any reason, the automatic overheat protection device will turn the heater off. To
reset the heater, simply turn power off and unplug the heater for 10 minutes until it cools
down, then plug in and restart the heater. Be sure that the heater is on a smooth, level
surface with no obstructions. The heater is also equipped with a safety tip-over switch.
This switch will shut the heater off if the heater is tipped over. It will reset when the heater
is placed upright.
CLEANING
CAUTION – Before cleaning the heater be sure to disconnect power cord and allow the
heater to cool completely. Clean the outside surface with a clean, damp cloth. Do not use
harsh chemicals or abrasive cleaners. DO NOT IMMERSE THE HEATER IN WATER. Allow
heater to dry completely before use.
REPAIR
DO NOT OPERATE THE HEATER WITHOUT THE GRILL IN PLACE. DO NOT USE THE
HEATER IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY.
STORAGE
Keep original carton for storage of the heater. Coil and tie the power cord to avoid
damage during storage.
