V2
5 -
Press and keep pressed the corresponding button on original remote control until the LED
CARTY-R
will lit on
6 -
Release the button and wait.
7 -
LED of
CARTY-R
will flash shortly for 2 seconds
This indicate the
source code
is required
8 - Press simultaneously buttons 1 and 2 of V2 remote control and release them both
9 -
LED of
CARTY-R
will flash quickly
10 -
Press and keep pressed the button
CARTY-R
where you need to memorize the code and wait for a
few seconds until the LED turned off to confirm the correct copy process.
11 -
Activate learning process in the receiver
IN THE RADIO RECEIVER
Check if the new
CARTY-R
is working see
V2:
MODE FAST
BFT
5 -
Press and keep pressed the corresponding button of original remote control until the LED
CARTY-R
will lit on
6 -
Release the button and wait.
7 -
After a while LED of
CARTY-R
then it will flash every 2 seconds.
This indicate that it is necessary to put a
source code
8
-
Press at the same time buttons 1 and 2 (or push with a pin the hidden button in the back side) of
BFT remote control and release until the LED BFT will turn on.
9 -
LED
CARTY-R
flashes quickly
10 -
Press and keep pressed the button
CARTY-R
where you need to memorize the code and wait for a few
seconds until the LED switched off to confirm that the code has been successfully copied
11 -
Activate learning process in the receiver
IN THE RADIO RECEIVER
Check the correct operation of the new
CARTY-R
see
BFT:
MODE FAST
TECHNICAL DETAILS
Power supply:
battery 3V CR2032
Range up:
from 60 to 100 mt.
UE Frequencies:
433,92Mhz / 868,30Mhz
CONFORMITY DECLARATION
Declare under our sole responsibility that the product
EB Technology
CARTY-R to which this declaration
relates is in conformity with all the essentialrequirements of the European Directive 1999/5/EC (R&TTED)
and the Council
Recommendation 1999/915/EC (Human Exposure). The conformity with the essential requirements of the
above Regulations has been verified against the following harmonised standards:• EN 300 220-2 • EN 301
489-1 • EN 301 489-3 • EN 60950-1:2006 +A11:2009+A1:2010+A12:2011 • EN 50371:2002
GB_CARTY-R
171218_VXX01 www.ebtechnology.it www.nologo.info
!!!
If the LED flashes three times and switched off, it means that the code has not been memorized, repeat from step n°2.
!!!
The memory
CARTY-R
is completely rewritable.
!!!
To memorize more buttons
CARTY-R
, repeat the operation from step n°2.
IT REMOTE CONTROL CARTY-R
Scan QR to
download info
about the
CARTY-R
CLONE REMOTE CONTROL ROLLING BFT
WITH SOURSE CODE BFT
CLONE REMOTE CONTROL ROLLING V2
WITH SOURSE CODE V2
