PAGE 7
Alert Priorities
Brightness Mode
Brightness Mode
Mute Mode
settings
The radar detector will alert in the follow-
ing priority order (highest to lowest):
POI detected alert and POI pass alert
Display brightness can be selected as
follows:
1. Display brightness while in Smart Dark
Mode can be selected as follows:
Pressing the MUTE button during an alert
will temporarily mute the detected signal
and will automatically un-mute 20 seconds
after the signal has passed, or if a new or
different signal has been detected.
Pressing the MUTE button without an alert
will permanently mute the radar detector
on X and K bands until manually unmuted or
after a new startup cycle. Ka band and laser
alerts will NOT be muted in this mode.
•
•
•
•
•
•
•
•
•
•
•
•
•
Laser
Ka band:
• Standard:
• Frequency:
K band:
• Standard:
• Frequency:
X band:
• Standard:
• Frequency:
POI Limit Speed
Bright: Full brightness
Dim: Reduced brightness
Dimmer: Further reduced brightness
Dark: The display turns off (completely
dark). The display only turns on when
a button is pressed
Smart Dark: The display turns off
(completely dark). The display turns
on when a button is pressed or during
an alert
S.D.Bright: Full brightness
S.D.Dim: Reduced brightness
S.D.Dimmer: Further reduced bright-
ness
1.
1.
1.
1.
2.
Mute Mode: Auto
Auto Mute Mode is selectable and reduces
the alert vlume by 0%, 20%, 40%, 60%, or
80%. The default is 40%.
Radar bands (X, K, and Ka) and POI limit
speed: current volume level stays for the first
3 seconds after the alert begins, afterwards,
it’s reduced to the selected Auto Mute level.
Auto Mute is not applicable to laser alerts.
Auto Mute ends 10 seconds after the alert
ends. If the same radar frequency is detected
or begins within 10 seconds, the radar detec-
tor keeps Auto Mute active.
If a different radar band is detected or begins
while Auto Mute is active, Auto Mute will be
disabled and will revert back to the current
volume level.
1.
2.
3.
4.
Notifications
When a radar signal is detected, the driv-
er will be alerted by a visual text warning
and a voice/tone alert that will indicate the
detected radar band, frequency and signal
strength. The display will blink for 3 seconds
and a beeping, warning tone will increase its
intensity with increasing signal strength. The
signal strength has 9 levels. The GPS alerts are
reported by voice and text.