Nolan N-Com Basickit N32, Инструкции по безопасности и эксплуатации

Страница: 9 / 16

ENGLISH
N32
23
NOTE: The cable DOES NOT have to pass through the hole in the shell.
(Fig. 13).
4. Make sure the fastening pin is in the “OPEN”
�
position.
5. Position the top hook of the Basic Kit (Fig. 14) in the corresponding groove
in the shell.
6. Line up the pin with the corresponding hole in the shell (Fig. 14).
7. Hook the Basic Kit to the shell and then lock it by turning the fastening pin,
with a coin, to the “CLOSED”
�
position (Fig. 15).
8. Glue the sealing trim (supplied with the Bluetooth kit and Intercom Kit) to
the basic kit, as shown in figure 15.
9. Take the loudspeakers set and position the foam protections on the loud-
speakers.
10. Prepare the loudspeakers set for assembly, as shown in figure 16).
11. Position the battery support in the special polystyrene housing located in the
rear of the shell (Fig. 17) without pushing it in completely.
FIG. 13
FIG. 14
FIG. 15
FIG. 16
FIG. 17
N32 000000043 10-07-2007 13:10 Pagina 23
9