250
300
785
557
300
300
TODLER CHAIR ASSEMBLY INSTRUCTIONS
Turn the chair upside down, being careful to protect the
wooden parts during installation. Using a screwdriver with
an H6 bit, secure the supporting post to the underside of the
seat with the screws and washers included (MK6S M8 x 12
+ FBB M10).
Installation with M10 bolts (‘N’ version): The base plate has
been made with holes to secure it to the surfaces with M10
bolts.
Installation on a wooden surface (‘N’ version): Use French-
style woodscrews to attach the base plate to the wood.
Installation on cobbles or paving stones (‘N’ version):
Anchor the cobbles or paving stones in a cast concrete base
without allowing any levelling sand to come between the
stones and the concrete. Drill holes in the surface sized to
accommodate expander bolts. A chemical anchor may also
be used.
Installation on concrete (‘N’ version): Attach with expander
bolts or a chemical anchor as instructed above. Attaching
with expander bolts makes it possible to remove and
reattach the chair as required.
Ground-mounted installation (‘M’ version): Prepare the
ground with a hole circa 40 cm in diameter to a frost-free
depth. Fill the hole with frost-resistant material so that the
hole is not deeper than 50 cm. Turn the chair upright and
position the supporting post in the hole. Ensure that the
chair seat is level in position as well as level on all sides.
The distance between the seat’s front edge and the ground
beneath should be 55.7 cm. The supporting post should be
cast in the concrete, leaving a gap of 5 cm between the top
of the concrete and the ground surface to be filled in with
surface material.
Ö19-29
Parco toddler chair
Delivery Specification:
1 seat,
1 support post (with fixed support
post or swivel),
4 screws and washers for attaching
the seat and backrest to the
supporting post.
Add a letter after the product code to specify the
version required, for example
Ö19-20
A
:
M = Ground-mounted armchair with extended
support post for casting in concrete 40 cm
beneath the surface
N = Attachable version with base edge extended
for bolting onto the surface
sid 7/7
Parco