2
Configure the following parameters:
Table 8-24
QoS Config parameters
Field
Description
QoS Setting
Type
Select a QoS service layer type from the list
L2 Criteria
or
L3 Criteria
.
Classification Criteria
Source MAC
Enter the source MAC address.
Click
Exclude
to exclude the source MAC address.
Interface
Select an interface from the list.
Classification Row
DSCP remark
Enter the value for the DSCP mark (range: 0-63); valid only for L3 Criteria.
802.1p Remark
Enter the value for the 802.1p (range: 0-7).
Forwarding Policy
Enter the number for the forwarding policy (range: 1-7).
Additional fields for L3 Criteria
Protocol
Select a protocol from the list, or click
Exclude
Application
Select an application from the list.
Source IP and Source IP
Mask
Enter the values for the source IP and IP mask, or click
Exclude
.
Destination IP and
Destination IP Mask
Enter the values for the destination IP and IP mask, or click
Exclude
.
Source Port and Source
Port Max
Enter the values for the source port and port max (highest port number) or click
Exclude
.
Destination Port and
Destination Port Max
Enter the values for the destination port and port max (highest port number), or click
Exclude
.
3
Click
Add
to add a QoS policy.
E
ND OF STEPS
Configure a XS-2426G-B indoor ONT
Network configuration
Configuring QoS
Nokia ONT
Review
Review
December 2021
Issue 1
119
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA