MJ-305
Module jig
0781487
Module jig MJ-305 can be used for flashing via USB and RF, battery and
system testing.
The main functions are:
•
Powering with external power
•
WLAN/BT/GPS RF-interfaces with probes
•
GSM/WCDMA RF-interfaces with probes
•
BSI mode selector (Tabby and Lynx interface, selected with battery
cable)
•
VBATT interface (Tabby and Lynx interface, selected with battery
cable)
•
SS-293 RF guiding plate is required with this jig
•
CA-205PS power cable is used with this jig
•
CA-158RS cable is used together with this jig for RF testing
•
Attenuation values for CA-158RS cable
Band
Default f/
MHz RX
Att. RX Default f/
MHz TX
Att. TX
GSM 850
881.6
-0.2
836.6
-0.2
GSM 900
942.4
-0.2
897.4
-0.2
GSM 1800
1842.8
-0.3
1747.8
-0.3
GSM 1900
1960.0
-0.3
1880.0
-0.3
WCDMA I
2140.0
-0.4
1950.0
-0.3
WCDMA II
1960.0
-0.3
1880.0
-0.3
WCDMA IV
2140.0
-0.4
1740.0
-0.3
WCDMA V
880.0
-0.2
835.0
-0.2
WCDMA VIII
942.6
-0.2
897.6
-0.2
WLAN
n/a
n/a
2442.0
-0.4
XRS-6
RF cable
0730231
The RF cable is used to connect, for example, a module repair jig to
the RF measurement equipment.
SMA to N-Connector approximately 610 mm.
Attenuation for:
•
GSM850/900: 0.3+-0.1 dB
•
GSM1800/1900: 0.5+-0.1 dB
•
WCDMA V/VIII: 0.3+-0.1dB
•
WCDMA I/II/IV: 0.5+-0.1dB
•
BT/WLAN: 0.5+-0.1dB
RM-824; RM-825; RM-826
Service information differences between RM-826 and
RM-824
Page 8 – 8
NOKIA INTERNAL USE ONLY
Issue 2
Copyright © 2012 Nokia. All rights reserved.