Nokia RH-21 Series, Руководство по устранению неисправностей

Страница: 27 / 38

CCS Technical Documentation Troubleshooting
RH-21
Issue 1 05/2003 Confidential

Nokia Corporation Page 27
C106 "The Phone has not received Secondary code bytes cor-
rectly." Mbus from Prommer->UEM-
>UPP(MbusRx)
FbusRx from Prommer->UEM->UPP
FbusTx from UPP->UEM->Prommer
C107 "The Phone MCU can not start Secondary code cor-
rectly." UPP
C586 "The erasing status response from the Phone informs
about fail." Flash
C686 "The programming status response from the Phone
informs about fail." Flash
Cx81 "The Prommer has detected a checksum error in the mes-
sage, which it has received from the Phone." FbusTx from UPP->UEM->Prommer
Cx82 "The Prommer has detected a wrong ID byte in the mes-
sage, which it has received from the Phone." FbusTx from UPP->UEM->Prommer
A204
Cx83
Cx84
Cx85
"The flash manufacturer and device IDs in the existing
Algorithm files do not match with the IDs received from
the target phone."
"The Prommer has not received Phone acknowledge to
the message."
"The Phone has generated NAK signal during data block
transfer."
"Data block handling timeout"
Flash
UPP
VIO/VANA?
Signals between UPP-Flash
Mbus from Prommer->UEM-
>UPP(MbusRx)
FbusRx from Prommer->UEM->UPP
FbusTx from UPP->UEM->Prommer
Cx87 "Wrong MCU ID." RFClock
UPP(Vcore)
Startup
for
flashing Required startup for flashing Vflash1
VBatt