manualshive.com logo in svg

Nokia NSB-7 Series, Руководство по обслуживанию

Поделиться
Скачать
Nokia NSB-7 Series Скачать руководство пользователя страница 185

PAMS Technical Documentation

Service Software Instructions

NSB-7

Issue 1 06/00 

ã

Nokia Mobile Phones Ltd.

Page 79

List for available names and numbers.

Write MS / Write SIM button (ALT+W):

Write SCM values to phone or SIM and checks the validity of names and numbers.

Read MS / Read SIM button (ALT+R):

Read SCM values from phone or SIM.

Save File... button (ALT+S):

Opens a default Windows 

File Save As

 dialog and asks filename where to save SCM

values.

Load File... button (ALT+L):

Opens a default Windows 

File Open

 dialog and asks filename where from load SCM

values. Checks the validity of names and numbers.

Memory group box:

When memory is selected 

SCM

 list box size is adjusted to correspond memory size.

Adjusting is done either adding empty entries to the end or removing entries from the
list box.

SIM radio button:

Selects dialog to edit SIM memory. NOTE: PIN code must be set before editing SIM.
During SIM selection user may be asked to insert PIN code and/or wait for SIM to
wake up.

MS radio button:

Selects dialog to edit phone memory. This is default when dialog is opened.

When all values are sent and responses received, waiting window is removed and 

Edit 

SCM

 is back in control. The waiting state can be broken with 

Cancel

 (ESC) button. If 

writing to the ME is broken, only part of the SCM entries in the ME may be changed.

SCM & User Settings... command

Activation

Status Bar Text

Alt, D,M

Open SCM & User settings dialog box.

Содержание NSB-7 Series





















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды