• Setup the signal generator to correspond with the values on the
Rx Calibration
pop-up window and click
OK.
Figure 41 Pop-up window for WCDMA2100
• Ensure Tuning Results are within limits specified in the table above: If values are OK, click Write to save
the values to the phone.
• Close the tuning window.
WCDMA transmitter tunings
Tx AGC & power detector (WCDMA)
Context
Tx AGC & power detector tuning has two purposes:
• to enable the phone to select the correct TxC value accurately in order to produce the required RF level
• to enable the phone to measure its own transmitter power accurately
There are two ways to perform the tuning. For an alternative method, see
Steps
1.
From the Operating mode drop-down menu, set mode to Local.
2.
Choose Tuning
→
WCDMA
→
Tx AGC & Power Detector.
3.
Click Start.
4.
In the
Wide Range
pane, click Tune (the leftmost Tune button).
RM-179; RM-223
RF troubleshooting
Issue 1
COMPANY CONFIDENTIAL
Page 4 –45
Copyright © 2007 Nokia. All rights reserved.
Содержание N81
Страница 111: ...4 RF troubleshooting Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page 4 1 Copyright 2007 Nokia All rights reserved ...
Страница 157: ...RM 179 RM 223 RF troubleshooting Issue 1 COMPANY CONFIDENTIAL Page 4 47 Copyright 2007 Nokia All rights reserved ...
Страница 237: ...Glossary Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page Glossary 1 Copyright 2007 Nokia All rights reserved ...