![background image](http://html.mh-extra.com/html/nokia/n81/n81_service-manual_254580129.webp)
WCDMA RX chain activation for manual measurement
Prerequisites
Make the following settings in Phoenix service software:
Setting
WCDMA2100
Phoenix Channel
10700
Signal generator to antenna connector
2141.0 MHz
Steps
1. Via Phoenix Testing menu, choose WCDMA/RX Control.
2. In the RX control window, make the following settings:
3. Click Start to activate the settings.
If the settings are changed later on (for example, change of channel) you have to click Stop and Start
again.
Note:
Clicking Stop also disables TX control if it was active.
4. Set the following RF generator settings:
RM-179; RM-223
RF troubleshooting
Issue 1
COMPANY CONFIDENTIAL
Page 4 –19
Copyright © 2007 Nokia. All rights reserved.
Содержание N81
Страница 111: ...4 RF troubleshooting Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page 4 1 Copyright 2007 Nokia All rights reserved ...
Страница 157: ...RM 179 RM 223 RF troubleshooting Issue 1 COMPANY CONFIDENTIAL Page 4 47 Copyright 2007 Nokia All rights reserved ...
Страница 237: ...Glossary Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page Glossary 1 Copyright 2007 Nokia All rights reserved ...