NOKIA
4
Nokia Industrial MulteFire Router Quick Guide
1.
Before you start
This guide provides instructions on Nokia Industrial MulteFire Router installation. The Nokia
Industrial MulteFire Router unit is designed to be installed on walls and poles, for both, indoor and
outdoor deployments.
Notice: The unit should be located away from any RF radiation sources, out of direct sun exposure,
and away from areas of potential salt spray
CAUTION! Risk of personal injury.
Ensure that the wall/pole and selected fasteners can sustain the device under required circumstances.
Evaluation of the wall/pole structure and fastening hardware type should be done by a structural
engineer.
Notice: Nokia Industrial MulteFire Router equipment must be installed by trained and qualified service
personnel in accordance with all local codes and requirements.
Notice: Nokia Industrial MulteFire Router equipment is intended for installation in a restricted access
location or equivalent.
Notice: The Nokia Industrial MulteFire Router interface panel should always face the ground. Any other
installation position might cause overheating and possible damage of the unit.
Notice: Avoid installing the device near windows to avoid external interference. It should also be
installed away from any potential sources of moisture, including heating or cooling ducts.
Notice: When installing the mounting bracket onto a vertical pole or a wall, ensure the antennas are on
top side of the unit.
NOTE: These installation instructions are meant to provide installation guidelines only. In all
cases local codes and requirements must be followed.
