NOKIA
16
Nokia Industrial MulteFire Router Quick Guide
8.
MulteFire Router Compliance Statements
Approved antenna for MulteFire Router
Antenna P/N
Frequency Range
(MHz)
Antenna Type
Gain (dBi)
DLYO-515903V-360-RPSMA-Q1
5150
–
5925
Omni
3
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and complies with the Class B digital device limits, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used according to the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference cannot occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by taking one
of the following actions:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the equipment and the receiver.
3.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4.
Consult the dealer or an experienced radio/RV technician for help
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment. RF Modules
installed in this product
must not be co-located or operating in conjunction with any other antenna or transmitters,
except when installed in accordance with FCC multi-transmitter product guidelines.
