GB 11
MEDIAMASTER INSTALLATION
This procedure is only required if Mediamaster is
connected to the TV by means of an RF cable.
To tune your own TV to the RF signal, you may have to refer
not only to this manual, but also to the manual of the TV set.
The steps here below explain what to do if you have not been
able to use SCART cables for connections.
• Connect Mediamaster.
• Insert the SMART CARD into the “SMART CARD 2” slot. The
golden clip shall be turned downwards and inwards.
It is
recommended to leave the SMART CARD inside
Mediamaster to receive enable commands constantly.
Tuning the TV to use Mediamaster
• Select a channel number which has not been used for other
TV channels on the TV set.
• Follow the instructions given by the TV set manual to tune the
UHF 39 channel (it is the UHF channel which is pre-assigned
to Mediamaster by default).
• The TV screen will show the PERSONALIZZAZIONE menu.
• Follow the instructions given by the TV set manual to store the
UHF channel you have selected as Mediamaster channel. This
is the channel which shall be selected to watch digital TV /
Radio channels.
• After having displayed the PERSONALIZZAZIONE menu, you
may start setting up as described by the following pages.
Note:
the Mediamaster RF Modulator works only on channel UHF39.
Tuning the TV set to RF connections
Содержание MEDIAMASTER 9701 S GOLD BOX
Страница 1: ...Owner s manual MEDIAMASTER 9701 S GOLD BOX ...
Страница 44: ...GB 45 NOTE ...