Nokia MEDIAMASTER 9701 S GOLD BOX, Руководство пользователя

Страница: 41 / 45

GB 42
Possible causes
The supply cable is not connected.
The Mediamaster is in standby
mode.
The satellite dish is not pointing at
the satellite.
Absent or weak signal.
The LNB is faulty.
The satellite dish is not pointing at
the satellite.
The signal is too strong.
The satellite dish is too small.
The LNB noise factor is too high.
The LNB is faulty.
The system is connected by SCART
cables and the TV set is not
in AV/EXT mode.
Il sistema è collegato tramite cavi
RF e l’apparecchio TV non è impo-
stato sul canale sintonizzato per la
TV satellitare digitale.
The system is connected by RF
cables and the Mediamaster output
channel interferes with an existing
terrestrial channel or with a video
signal.
Battery exhausted.
The remote control is not correctly
pointed.
The Mediamaster can not recognise
the Smart Card.
SOLUTIONS OF THE PROBLEMS
Problem
The display on the front panel will not
light up / power on.
No sound or picture, but the time or
- - : - - is displayed on the front panel.
No sound or picture. Only a red small
square appears on the screen, at the
bottom, on the right.
Disturbed images / Pointing error.
Breaking images divided
into squares.
The PERSONALIZZAZIONE menu of
the first installation will not appear on
the screen.
There is interference on the digital
satellite channels, an existing
terrestrial channel or a video signal.
The remote control is not working.
A message will appear on the screen.
View Card error.
You have forgotten your secret PIN
code.
Solution
Make sure the supply cable is
connected to the power outlet.
Press the standby key or any other
numeric key to power on the
Mediamaster and disable the standby
mode.
Adjust the dish. Check the indicator
of the signal level in the “TECHNICAL
PARAMETERS” menu described on
page 16.
Check the LNB and other devices
connected between the LNB and
the receiver or adjust the dish.
Replace the LNB.
Adjust the dish.
Connect a signal attenuator to the
LNB input.
Install a larger dish.
Install an LNB with a lower noise
factor.
Replace the LNB.
If the system is connected by
SCART cables, switch the TV to the
corresponding AV input.
If the system is connected by RF
cables, switch the TV to the
channel for the digital satellite TV.
If you have not manually tuned the
TV, do it now. Please follow the
instructions in the TV manual.
Arrange an attenuator on the
terrestrial antenna cable which has
been adjusted on channel 39,
connect the system by SCART
cables.
Replace the batteries (both of
them). Point the remote control to
the receiver. Make sure nothing
blocks the front panel.
Check that you are using the
correct Smart Card. Make sure the
Smart Card has been correctly
inserted, the golden clip is turned
downwards and arranged in the
SMART CARD 2 slot..
If the problem persist, it might be a
problem concerning the card.
Contact your retailer or service
provider.
Contact your service provider.
They will help you define another
one.