background image

GB 19

NAVI™ BARS NAVIGATOR

Control  

  Edit channels

From these menus you can create and edit favourite channel lists. You can add,
delete, rename and arrange the order of the channels within the favourite lists.
The “All TV”or “All Radio” lists might contain lots of channels. By creating your
own favourite lists you can make channel handling a bit more convenient.

Important about editing channels

Before you start you must select which list, TV or radio, you want to edit. If you
are watching TV and press 

select

 and choose Edit channels, you can only edit TV

channels. If you are listening to radio channels you can edit radio channels.
After the selection, radio or TV, use 

cursor left

/

cursor right

 to select the name of

the list to edit.

Create list

From here you create your own favourite lists, containing the channels you watch
most frequently. You must give each list a specific name, e.g. “Sport” or “Films”.
The new lists you create will appear as a new folder in the horizontal part of the
Navigator.

When a favourite list is selected, you see only those channels defined in the list.

When you have given the list a name; press 

select

 and choose “Add/Delete Chan-

nels” from the menu.

You can create up to eight separate favourite lists for TV and radio channels.

How to give a specific name

This procedure is the same whether you enter a name for the first time or change
an existing.

• Move to a new character position by using 

cursor left

/

cursor right

.

• If you make a mistake, you can remove characters to the left by pressing 

txt

 as

many times as needed.

• Enter the name as follows:

Press the numerical button corresponding to the character you want: once for

the first character, twice for the second and so on.

The available characters are listed below.

• If the next letter is located on the same key as the present one, wait for the time-

out or press 

cursor right

 to move one position and then select the letter.

• Toggle between capital and lowercase letters with 

opt

.

• To insert a space, press numerical button number 

0

.

1

. , - ? ! 1

2

a b c 2 Å Ä Á Á Â C Ã

3

d e f 3 É É Ë Ê

4

g h i 4 Î Ï Í Ì

5

j k l 5

6

m n o 6 Ö Ô Ñ Ó Ò

7

p q r s 7 $

9

w x y z 9

8

t u v 8 Ü Ù Ú

0

space 0

Содержание MEDIAMASTER 9460 S
































Отзывы: